RO Membrane 100 gpd Filmtec

Filmtec Dupont formally Dow Membranes

The worlds best  – Made in the USA!

These top of the line membranes fit any standard residential membrane housing. Upgrade today.

This RO Membrane is rated at 100 GPD Gallons per Day

Features
• 99% Stabilized Salt Rejection
• Operating pH from 2 to 12 Tolerating a pH of 1 Short Term
• Maximum Temperature 110 degrees F
• Non-Chlorine Tolerant

FilmTec™ Reverse Osmosis (RO) Elements are some of the most reliable
and consistent elements manufactured in the industry.

Advanced membrane technology and precision manufacturing result in elements produced to tight, pre-
defined specifications with consistent RO element performance. DuPont’s focus on
manufacturing excellence is an essential measure to ensure OEM and brand owner
customers develop and maintain their reputation for building world class, reliable water
purifiers that produce water consumers can trust.

FilmTec™ RO Elements offer quick stabilization at high
rejection and flow performance, and long effective lifetimes.

Element performance is
achieved by coupling FilmTec™ patented membrane flat sheet technology with
efficient element designs that are less prone to flux loss due to scaling. Systems are
enabled to produce reliable, high quality water with minimal system maintenance costs.

A summary of the element features includes:
– High rejection at start-up and after stabilization
– Up to 20% higher flow rates than competitive elements operated at the same
pressure
– Stable, reliable performance even when treating high hardness waters
– NSF International safety certification and ability for NSF data transfer to reduce
certification costs
– Dry shipping for convenient handling and long shelf-life

Reverse osmosis is the finest level of filtration available. The RO membrane acts as a barrier to all dissolved salts and inorganic molecules, as well as organic molecules. Feed water flows along the membrane surface under pressure. Purified water permeates the membrane and is collected, while the concentrated water, containing dissolved and undissolved material that does not flow through the membrane, is discharged to the waste-water line.

Removes up to 99% of Calcium, Sodium, Magnesium, Potassium, Manganese, Iron, Aluminum, Copper, Nickel , Cadmium, Silver, Zinc, Mercury, Hardness Ca & Mg, Radioactivity, Chloride, Ammonium, Bromide, Phosphate, Chromate, Cyanide, Sulfate, Thiosulfate, Silicate, Silica, Nitrate , Boron, Borate, Fluoride, Polyphosphate, Orthophosphate, Chromate, Bacteria, Uranium, Arsenic, Lead.

* Output based on 65PSI, 77°F, 250ppm TDS water input over a 24-hour period. Lower pressure, cooler water temperature or higher TDS will reduce output. A booster pump is highly recommended if pressure is below 45 PSI.